Skip to main content

 

Graduate Students

Khaled Alghamdi

  • PhD Student, 2024
  • Enabling Thermal Energy Storage to Accommodate Oklahoma Wind Energy - TriCoil as Cost Effective Means for Residential System Integration 
  • Ishraque Zaman Borshon

  • PhD Student, 2026
  • Developing Improved Tools for the Design of Ground Heat Exchangers used with Ground-Source Heat Pump Systems
  • Kalen Gabel

  •  Masters Student, 2022
  • Developing a Semi-Empirical Compressor Model that can Extrapolate and Capture Modulation in HVAC&R Systems 
  •  

    Matin Ghadiri Yazdi

  • PhD Student, 2025
  • Low GWP Refrigerant Evaluation for Fin and Tube Heat Exchanger Coils
  • Mazharul Islam

  • PhD Student, 2023
  • Design and Development of a Novel Peristaltic Compressor for Air-Conditioning and Refrigeration Applications
  • Farhan Istiaque

  • Masters Student, 2023
  • Enabling Thermal Energy Storage to Accommodate Oklahoma Wind Energy - TriCoil as Cost Effective Means for Residential System Integration
  •  

    Amjid Khan

  • PhD Student, 2026
  • A Near Isothermal Rotating Spool Compressor For Refrigeration Applications
  • Abraham Lee

  • PhD Student, 2022
  • Experimental Validation of Refrigerant Charge Models in Coils for Residential Split Systems 
  • Amirarsalan Mashhadian

  • PhD, 2026
  • Developing and Assessing Different Logic for Defrosting in the Heat Pumps
  •  

    Hyunjin Park

  •  PhD Student, 2022
  • Develop Design Criteria for Psychrometric Air Sampler and Mixer Apparatus for Use in ASHRAE Test Standards
  • Toward Optimal Secondary Furnace Heat Exchanger: Modeling of Furnace Combustion Gas Condensation
  • Kyle Shepard

  • Masters student, 2024
  • Foamability Properties of Low GWP Refrigerant and Oil Mixtures
  • Mohsin Tanveer

  • PhD Student, 2023
  • Performance Evaluation of Positive Displacement Compressors for low-GWP Refrigerants
  • Model Validation and Valve Modeling for the Development of Rotating Spool Compressor
  •  

    Graham Tyra

  • Masters Student, 2024
  • Analysis of Low Global Warming Potential Refrigerants on Existing Compressors
  • Timothy West

  • Masters Student, 2023
  • Automated GHE Design
  • Shahzad Yousaf

  • PhD Student, 2026
  • Reduced-order Modeling of Vapor Compression Cycles 
  • CIBS INTERNS

    Vaughn Berkheiser

  • BSME 2021
  • An Upgrade to the Supplemental Chiller System for the OSU Psychrometric Chamber 
  • Madison Holberg

  • BSME 2023
  • Optimization of Ground Heat Exchanger Thermal and Hydraulic Design 
  •  Tim Pfeiffer

  • Diplom Student, 2024
  • Development of an Automated Load Stand Control System for a Hot gas Bypass Compressor Testing Setup
  •  

    Parker Raney 

  • BSME 2023
  • Project TBD
  • Jeswin Thomas

  • BSME 2024
  • Project TBD
  • CIBS Alumni

    Caleb Bengs 

  • BSAE/BSME 2022
  • PhD Student at Texas A&M
  • Jack Cook

  • Masters Student, 2021
  • Employer: AGCO Corp.
  • Saad Saleem

  •  PhD in Mechanical Engineering, December 2021
  • Employer: Energy Consultant at Guidehouse
  •  

    Simon Devlin

  • 2022
  • Madison Enright 

  • BSME/BSAE 2021
  • Employer: CymSTAR
  • Mahayla Mitchell

  • BSAE/BSME 2022
  •  

    Lauren Moriarty

  • BSME 2021
  • Employer: ADG Engineering
  • Tien Nguyen

  • 2022
  •  Evan Nichols

  •  BSAE/BSME 2022
  • Employer: John Zink
  •  

    Stephen Paris

  • BSAE/BSME 2021 
  • Joaquin Rodriguez

  • BSME 2021
  • Ethaniel Tobar

  • BSAE/BSME 2023
  • Back To Top
    MENUCLOSE