MAE Graduate Research Symposium Agenda, March 1, 2024
The symposium will be held at the OSU Student Union on Friday, March 1. The agenda for the symposium is provided below. Use the links for each session to navigate to the list of presentations and presenting authors.
- Welcoming Remarks (08:00-08:15; Room 265 - Ballroom)
- Undergraduate Poster Presentations (08:15-09:00; Room 265 - Ballroom)
- Graduate Talks
- Graduate Poster Presentations (Room 265 - Ballroom)
Undergraduate Poster Presentations (08:15-09:00)
| Poster | Author/Presenter | Abstract Title |
|
1 |
Austin Rouser | An Experimental Evaluation of Upper Leading-Edge Surface Roughness Effects on Propeller Performance |
| 2 | Kate Spillman |
Mitigation of infrasound noise on stratospheric solar powered balloons
|
| 3 | Sam Glenn | Wing shape has minimal impact on the aerodynamic performance of hovering tiny insects |
| 4 | Dawson Manning | Evaluation of Self-Aspirated Flow Controls to Suppress Boundary Layer Separation for Low Reynolds Number Operations |
| 5 | Caroline King | Motion Analysis of Pregnant Women for Musculoskeletal Modeling |
| 6 | Gavin Sockey | Realistic wind field prediction in various urban morphologies for application to small unmanned aerial systems using deep learning |
| 7 | Adam Leicht | Design, Manufacturing, and Experiments of Additive Manufactured Stiffened Thin-walled Plates |
| 8 | James Schiermeyer III | In-silico prediction of tension-type chronic headaches |
| 9 | Trey Dorrell | Investigating the Performance Effects of Aluminum Powder Additives in 3D-Printed Hybrid Rocket Motors |
Graduate Talks
-
-
Session 1 and session 3 will be held in room 297 (Suite 1600) of the OSU Student Union
-
Session 2 and session 4 will be held in room 280 (Sequoyah Room) of the OSU Student Union
-
Session 1
| Start | End | Session | Author/Presenter | Abstract Title |
|
09:00 |
09:15 | 1 | Liyaqat Ali Kamran | Effect of crystallinity on mechanical properties of polyethylene terephthalate (PET) |
| 09:15 | 09:30 | 1 | Garrett Terry |
Preliminary Acoustic Results from a Turbulent Jet to Examine the Effect of Latent
Heat
|
| 09:30 | 09:45 | 1 | Noel Rajive | Effects of varying aspect ratio on the hydrodynamics of copepod escape maneuvers |
| 09:45 | 10:00 | 1 | Md Saiful Islam | Pairwise interactions, feedback rule changes, and deliberative observation/decision periods support Flying Insect Group Coordination |
| 10:00 | 10:15 | 1 | Bunty Tomar | Microstructure evolution in steel/copper graded deposition prepared using wire arc additive manufacturing |
Session 2
| Start | End | Session |
Author/Presenter |
Abstract Title |
| 09:00 | 09:15 | 2 | Pouria Moghimi | Thermal Energy Storage Tank in Residential Buildings; Buried or Above-ground? |
| 09:15 | 09:30 | 2 | Md Raqibul Hasan Prince | Discrete Material Optimization of Manufacturable Composite Laminated Structures |
| 09:30 | 09:45 | 2 | Soham Bhakta | Design and evaluation of a compact axial compressor test rig for heating and air conditioning applications |
| 09:45 | 10:00 | 2 | Muzaffar Qureshi | Scalar Field Mapping with Online High-Intensity Region Avoidance |
| 10:00 | 10:15 | 2 | Adetokunbo Awonusi | Whole-colony flexibility and orientation of sheet-like sea fans assists in particle capture |
| 10:15 | 10:30 | 2 | Ishriak Ahmed | In orbit Orbital debris capture: fundamental acceptance limits and mechanical experiment design |
Session 3
| Start | End | Session | Author/Presenter | Abstract Title |
|
13:00 |
13:15 | 3 | Mitchell Ford | Increasing number of propulsors in a metachronal rowing system augments body speed but lowers mechanical efficiency |
| 13:15 | 13:30 | 3 | Ashraf Kassem | Reconstructing Equations of Motion of Atmospheric Entry Vehicle and Aerodynamic Parameters Estimation Using System Dynamics Discovery Model |
| 13:30 | 13:45 | 3 | David Kelley | Achieving a Desired Wing Lift Distribution through use of a Multibody Dynamic System |
| 13:45 | 14:00 | 3 | Mohammed Abir Mahdi | Material Properties Prediction of Lattice Structures using Machine Learning & Homogenization Approach |
| 14:00 | 14:15 | 3 | Tochukwu Ogri | An adaptive optimal control approach to monocular depth observability maximization |
Session 4
| Start | End | Session | Author/Presenter | Abstract Title |
|
13:00 |
13:15 | 4 | Nahid Uzzaman | A novel adaptive Kalman Filter for systems with dynamic noise covariance |
| 13:15 | 13:30 | 4 | Jacqueline Esimike | Gasper-induced jets promote momentary downward transport of exhaled particles inside airliner cabins |
| 13:30 | 13:45 | 4 | Nafis Mohammad Nayeem | Recursive multi-agent wind structure estimation formulation |
| 13:45 | 14:00 | 4 | Erick Pepek | Additive Manufacturing Filament Testing Methods for Increasing Sustainability |
| 14:00 | 14:15 | 4 | Furkan Oz | Nonlinear Parameter Estimation for Blunt Body Dynamic Stability Identification |
| 14:15 | 14:30 | 4 | Soumik Dutta | Reduced Order Modeling and Image Processing Based Structural Analysis of Tow Steered Composite Laminates Considering Gaps/Overlaps |
Graduate Poster Presentations
-
-
Odd numbered poster presenters are required to be available in front of their poster for the first 45 minutes of their assigned session (10:30-11:15 for session 1; 14:30-15:15 for session 2).
-
Even numbered poster presenters are required to be available in front of their poster for the second 45 minutes of their assigned session (11:15-12:00 for session 1; 15:15-16:00 for session 2).
-
Session 1 (10:30-12:00)
| Poster | Author/Presenter | Abstract Title |
| 1 | Masoud S. Sakha | Event-Triggered Control with Switched Observers |
| 2 | Anthony Hassett | Examination of the Applicability of the Method of Brooks et al. for Noise Prediction of Low Reynolds Number Propeller Airfoils |
| 3 | Tasfia Kamal | Developing a Modular Multi-Disciplinary Modeling Framework for Electric Vertical Takeoff and Landing (eVTOL) Aircraft |
| 4 | Md Nazmus Sakib | Modeling Thermally Induced Reversible Actuation in 4D-Printed Liquid Crystal Elastomers |
| 5 | Sanzida Hossain | Cooperative Driving Between Human-Driven and Autonomous Vehicles: Incorporating Stochastic Human Driving States |
| 6 | Mehdi Yadipour | Optic flow embodiments of Cucker-Smale flocking in three dimensions |
| 7 | Obichukwu Iheonu | Optimal bone architectures under lunar and Martian gravity |
| 8 | Tawhidur Rahman | Mechanism of Melt Primary Breakup in Still Air for Powder Production |
| 9 | Shafi Al Salman Romeo | Data Fusion Model Incorporating Physics for Assessing Uncertainty in Dynamic Stability of Atmospheric Entry Vehicles |
| 10 | Petra Kis | Effect of blood flow occlusion on changes in torque complexity during intermittent maximal-effort contractions |
| 11 | James Cheh | A New Class of Tensile Structure: Nets with Crosslinks |
Session 2 (14:30-16:00)
| Poster | Author/Presenter | Abstract Title |
| 1 | Zachary Wattenbarger | Leading Edge Convection Heat Transfer for an Airfoil at Low Reynolds Number |
| 2 | Nabia Fardin | Design of a Cycloidal Rotor Based eVTOL Aircraft |
| 3 | Anuj Maheshwari | Structural composites from post-consumer PP carpet and recycled PP resin |
| 4 | Shahbaz P Qadri Syed | Approximate constrained stochastic optimal control via parameterized input inference |
| 5 | Ujjval Patel | Power Line Detection Using ToF Sensor Data: A MAP Estimation Approach |
| 6 | Carson Kelly | Pneumatic Launching of High Performance Fixed Wing Unmanned Airframes |
| 7 | Sterling Pittman | Exo-prosthetics to improve the gait of below-knee amputees |
| 8 | Rohit Kameshwara Sampath Sai Vuppala | Machine Learning based Reduced Order Models for wind field prediction in urban spaces for Unmanned Aerial Systems |
| 9 | Celeb Besmer | Effect of Varied Burn Rate Catalyst Sensitivity on APCP Solid Rocket Motor Performance |
| 10 | Soroosh Farsiani | Development of Robotic Arm Platform for Fused Deposition Modeling of Polymer Composites |