Skip to main content

Dr. Ranji Vaidyanthan's Research

Dr. Ranji Vaidyanthan

Selected Publications

  1. Vaidyanathan, R.; Luevano, E.; and Villarreal, M.; “Manufacturing and Testing of Liner-less All-Composite Tanks for Storage and Transportation of CNG,” SAMPE Journal Special Issue on Alternative Energy, 53, 6, 48-52 (2017)
  2. Amrollahi, P.; Krasinsky, J.; Vaidyanathan, R.; Tayebi, L.; and Vashaee, D.; “Electrophoretic Deposition (EPD): Fundamentals and Applications from Nano-to Micro-Scale Structures,” Handbook of Nanoelectrochemistry: Electrochemical Synthesis Methods, Properties, and Characterization Techniques, 561-591 (2015)
  3. Vaidyanathan, R., “Chapter 2: Additive Manufacturing Technologies for Polymers and Composites,” Additive Manufacturing, Editors: A. Bandyopadhyay and S. Bose, Pub: CRC Press, 19-64 (2015)
  4. Ortega, A.; Lei, N.; and Vaidyanathan, R.; “High-performance Heat Sinks Utilizing Two-phase Flow in Stacked Minichannels,” Journal of Enhanced Heat Transfer, 21, 6 (2014)
  5. Jain, A.; Pandey, G.; Singh, A.K.; Rajagopalan, V.; Vaidyanathan, R.; and Singh, R.P.; “Fabrication of Structural Composites From Waste Carpet,” Advances in Polymer Technology, 31(4), 380-389 (2012)
  6. Pandey, G.; Singh, A.K.; Rajagopalan, V.; Vaidyanathan, R.; and Singh, R.P.; “Interfacial Micromechanics and Effect of Moisture on Fluorinated Epoxy Carbon Fiber Composites,” Polymer Composites, 32, 1961-1969 (2011)
  7. Patankar, S.N.; Mohan, R.; Kelkar, A.D.; and Vaidyanathan, R.; “Processing and Characterization of Epoxy Resin Dispersed with Multi-walled Carbon Nanotube (MWNT) Derived from Camphor,” Materials Science and Engineering A, 529, 253-256 (2011)
  8. Chakravarthi, D.; Khabashesku, V.N.; Vaidyanathan, R.; Blaine, J.; Yarlagadda, S.; Roseman, D.; Zeng, Q.; and Barrera, E.V.; “Carbon Fiber – Bismaleimide Composites Filled with Nickel-Coated Single-Walled Carbon Nanotubes for Lightning Strike Protection,” Advanced Functional Metals, 21(13), 2527-2533 (2011)
  9. Tellis, B.C.; Szivek, J.A.; Bliss, C.L.; Margolis, D.S.; Vaidyanathan, R.K.; and Calvert, P.; “Trabecular Scaffolds Created Using Micro CT Guided Fused Deposition Modeling,” Materials Science and Engineering C (Biomimetic and Supramolecular Systems), 28, 1, 171-178 (2008)
  10. Szivek, J.A.; Bliss, C.L.; Geffre, C.P.; Margolis, D.S.; DeYoung, D.W.; Ruth, J.T.; Schnepp, A.B.; Tellis, B.C.; and Vaidyanathan, R.K.; “An Instrumented Scaffold can Monitor Loading in the Knee Joint,” Journal of Biomedical Materials Research Part B: Applied Biomaterials, 79B, 2, 218-222 (2006)

Research Group Members

Back To Top